|
anaiis_massive.lha |
44.5KB |
22-05-3105/31 |
Short: Massive release 1.22
Gilles Pelletier
gilles pelletier live fr (Gilles Pelletier)
driver/other
1.22 (30-May-2022)
ANAIIS / Thylacine-1.3
where you want (assign and mount should be present
thumb or disk device in a port (highway, subway...
the size of the key, and the disk state (validatin
be carefull with usb thumbs, write number are limi
to false.
mount the key automaticaly (KS 3.1 only).
mount all partitions known from the RDB (KS 3.1 on
the device is automatically removed from the syste
- if the stack stops.
- if the user closes Massive window.
- if the user unplugs the stick (key, thumb, disk.
same as TRUE, but force the mountlist in 1.x synta
same as ALL, but force the mountlist in 1.x syntax
these token are usefull in multiboot, where mount
1.x for compatibility.
set the number of buffers (use memory as disk cach
(force the dostype, useful if we want to change th
(don't use it) delay between CBW, DATA and CSW
(don't use this, it's very slow)
(trace only prolog), TRACE=FULL (trace all access
(trace all in RAM:massive.log))
can identify a device by its product id
can identify a device by the vendor
set pri to 1 freeze mouse but increase transfer ra
wait 10 seconds before start, if you want to autob
no window (default)
show anoying window with errors.
use the c:mount command
to mount
to mount all partitions known from the RDB.
same as MOUNT, for 1.x mount command.
same as MOUNTALL, for 1.x mount command.
to unmount
to make Read/write, by default you can't write to
be carefull with usb thumbs, write number are limi
to false.
set the number of buffers (use memory as disk cach
(force the dostype, useful if we want to change th
(don't use it) set delay between CBW, DATA and CSW
can identify a device by its product id
can identify a device by the vendor
set the maxtransfer
set the address mask (ANAIIS is not DMA... so this
set pri to 1 freeze mouse but increase transfer ra
wait 10 seconds before start.
force scsi commands instead AmigaDOS commands.
show anoying window with errors.
window during booting and mounting.
the same as SPLASHWINDOW.
use the c:mount command
usbkey0: from ram:usbkey0
format the volume with the quick option
usbkey0: name "my usb volume" quick
DosType Notes
0x444f5300 FFS/0 ok (crash on 1.3)
0x46415401 FAT/1 ok (work also on 1.3)
0x50465301 PFS/1 ok (2.04 and upper, work also on
thumb (silver key)
to have a PRI=0, and SCSICMDS=TRUE options to work
fine !
you should get the following entries
usbkey0: from ram:usbkey0
more than one device, mountlist files are numbered
must have a maxtransfer=4096 |
Short: Massive release 1.22
Gilles Pelletier
gilles pelletier live fr (Gilles Pelletier)
driver/other
1.22 (30-May-2022)
ANAIIS / Thylacine-1.3
where you want (assign and mount should be present
thumb or disk device in a port (highway, subway...
the size of the key, and the disk state (validatin
be carefull with usb thumbs, write number are limi
to false.
mount the key automaticaly (KS 3.1 only).
mount all partitions known from the RDB (KS 3.1 on
the device is automatically removed from the syste
- if the stack stops.
- if the user closes Massive window.
- if the user unplugs the stick (key, thumb, disk.
same as TRUE, but force the mountlist in 1.x synta
same as ALL, but force the mountlist in 1.x syntax
these token are usefull in multiboot, where mount
1.x for compatibility.
set the number of buffers (use memory as disk cach
(force the dostype, useful if we want to change th
(don't use it) delay between CBW, DATA and CSW
(don't use this, it's very slow)
(trace only prolog), TRACE=FULL (trace all access
(trace all in RAM:massive.log))
can identify a device by its product id
can identify a device by the vendor
set pri to 1 freeze mouse but increase transfer ra
wait 10 seconds before start, if you want to autob
no window (default)
show anoying window with errors.
use the c:mount command
to mount
to mount all partitions known from the RDB.
same as MOUNT, for 1.x mount command.
same as MOUNTALL, for 1.x mount command.
to unmount
to make Read/write, by default you can't write to
be carefull with usb thumbs, write number are limi
to false.
set the number of buffers (use memory as disk cach
(force the dostype, useful if we want to change th
(don't use it) set delay between CBW, DATA and CSW
can identify a device by its product id
can identify a device by the vendor
set the maxtransfer
set the address mask (ANAIIS is not DMA... so this
set pri to 1 freeze mouse but increase transfer ra
wait 10 seconds before start.
force scsi commands instead AmigaDOS commands.
show anoying window with errors.
window during booting and mounting.
the same as SPLASHWINDOW.
use the c:mount command
usbkey0: from ram:usbkey0
format the volume with the quick option
usbkey0: name "my usb volume" quick
DosType Notes
0x444f5300 FFS/0 ok (crash on 1.3)
0x46415401 FAT/1 ok (work also on 1.3)
0x50465301 PFS/1 ok (2.04 and upper, work also on
thumb (silver key)
to have a PRI=0, and SCSICMDS=TRUE options to work
fine !
you should get the following entries
usbkey0: from ram:usbkey0
more than one device, mountlist files are numbered
must have a maxtransfer=4096 |
|
|
SAGADriver.lha |
287.5KB |
21-11-2211/22 |
Short: SAGA Driver Package
Apollo Team
Renaud Schweingruber
|
Short: SAGA Driver Package
Apollo Team
Renaud Schweingruber
|
|
|
Sensei.lha |
33.6KB |
21-06-0106/01 |
Short: Displays I2C Sensor information on W
Henryk Richter
henryk richter gmx net
driver/other
1.5
OS 3.0+
Commodity and can be controlled by the Commodities
customization options are available by the pull-do
http://bax.comlab.uni-rostock.de/dl/Sensei_A3k_v13
to start Sensei at boot time, just put the program
sure that your I2C interface is working. The i2cli
bus without complaints, you are probably good to g
poll and display data from sensors.
filter out sensors that are defined in the configu
display (SHOWTITLE) will work only if the font hei
options are the same for starting from CLI or Work
NONE =background color filled window,
TRANS =fully transparent window including
boxes
sensor name in first row (requires
0 = show only values and units in a single row
standard)
standard for highlights), in TRANS mode only
0 = outward (like buttons)
1 = recessed
2 = off
types, given as hexadecimal,
e.g. COLORV=FF00FF will show magenta voltages
|
Short: Displays I2C Sensor information on W
Henryk Richter
henryk richter gmx net
driver/other
1.5
OS 3.0+
Commodity and can be controlled by the Commodities
customization options are available by the pull-do
http://bax.comlab.uni-rostock.de/dl/Sensei_A3k_v13
to start Sensei at boot time, just put the program
sure that your I2C interface is working. The i2cli
bus without complaints, you are probably good to g
poll and display data from sensors.
filter out sensors that are defined in the configu
display (SHOWTITLE) will work only if the font hei
options are the same for starting from CLI or Work
NONE =background color filled window,
TRANS =fully transparent window including
boxes
sensor name in first row (requires
0 = show only values and units in a single row
standard)
standard for highlights), in TRANS mode only
0 = outward (like buttons)
1 = recessed
2 = off
types, given as hexadecimal,
e.g. COLORV=FF00FF will show magenta voltages
|
|
|
Helios_0.5-svn_r622.lha |
107.9KB |
21-04-2704/27 |
Short: IEEE1394 (FireWire) driver, tools +
yomgui1@gmail.com (Guillaume Roguez)
polluks+aminet sdf lonestar org (Stefan Haubenthal
driver/other
0.5 (16.04.17)
driver/other/Helios_*
http://yellowblue.free.fr/yiki/doku.php/dev:helios
Beta stage.
TD_FORMAT and TD_WRITE and all SCSI commands!
: this file!
: All files needed to develop applications using H
: C header files (.h).
already built in C directory.
: Examples built for you.
and usage
and limitations
modes limitations:
request not supported.
prefs, no localisation... |
Short: IEEE1394 (FireWire) driver, tools +
yomgui1@gmail.com (Guillaume Roguez)
polluks+aminet sdf lonestar org (Stefan Haubenthal
driver/other
0.5 (16.04.17)
driver/other/Helios_*
http://yellowblue.free.fr/yiki/doku.php/dev:helios
Beta stage.
TD_FORMAT and TD_WRITE and all SCSI commands!
: this file!
: All files needed to develop applications using H
: C header files (.h).
already built in C directory.
: Examples built for you.
and usage
and limitations
modes limitations:
request not supported.
prefs, no localisation... |
|
|
dsp3210.lha |
41.6KB |
21-01-1801/18 |
Short: DSP 3210 drivers and tools
Thomas Winischhofer
thomas winischhofer net (Thomas Winischhofer)
driver/other
1.00
contains several tools to use and operate
on AA3000/AA3000+ motherboards.
installs an interrupt server.
for third party drivers to add their
concept of the onboard DSP had SuperDMAC
mind. This version of SuperDMAC has
does not use the control signals.
offers an infrastructure to let the DSP
helps applications to use the DSP by
DSP binaries, ready to link to your own
to the start of the file.
you simply do
; the linked binary
this archive are written in 2020 by |
Short: DSP 3210 drivers and tools
Thomas Winischhofer
thomas winischhofer net (Thomas Winischhofer)
driver/other
1.00
contains several tools to use and operate
on AA3000/AA3000+ motherboards.
installs an interrupt server.
for third party drivers to add their
concept of the onboard DSP had SuperDMAC
mind. This version of SuperDMAC has
does not use the control signals.
offers an infrastructure to let the DSP
helps applications to use the DSP by
DSP binaries, ready to link to your own
to the start of the file.
you simply do
; the linked binary
this archive are written in 2020 by |
|
|
awiz964.lha |
71.5KB |
20-10-1410/14 |
Short: AmyWiz2 - connect to Sharp Wizard PD
Herb Choate
Matt_H amiga org
driver/other
0.964 |
Short: AmyWiz2 - connect to Sharp Wizard PD
Herb Choate
Matt_H amiga org
driver/other
0.964 |
|
|
ICSItaCat.lha |
57.1KB |
20-03-1603/16 |
Short: Italian catalog for ICS v2.03
David Lo Buglio
David Lo Buglio
driver/other
1.0
http://aminet.net/driver/other/ICS.lha http://www.
IMPLICITA, NE ALTRIMENTI. USANDO QUESTO SOFTWAR
CHE POSSONO ANDARE PERSI. |
Short: Italian catalog for ICS v2.03
David Lo Buglio
David Lo Buglio
driver/other
1.0
http://aminet.net/driver/other/ICS.lha http://www.
IMPLICITA, NE ALTRIMENTI. USANDO QUESTO SOFTWAR
CHE POSSONO ANDARE PERSI. |
|
|
ScanQuix5ItaCat.lha |
17.7KB |
19-02-1302/13 |
Short: Italian catalog for ScanQuix5
David Lo Buglio
David Lo Buglio
driver/other
1.1
ScanQuix5
IMPLICITA, NE ALTRIMENTI. USANDO QUESTO SOFTWAR
CHE POSSONO ANDARE PERSI. |
Short: Italian catalog for ScanQuix5
David Lo Buglio
David Lo Buglio
driver/other
1.1
ScanQuix5
IMPLICITA, NE ALTRIMENTI. USANDO QUESTO SOFTWAR
CHE POSSONO ANDARE PERSI. |
|
|
anaiis.lha |
277.7KB |
18-12-2112/21 |
Short: ANAIIS USB Stack Release 1.18 |
Short: ANAIIS USB Stack Release 1.18 |
|
|
anaiis_boot.lha |
241.5KB |
18-12-2112/21 |
Short: ANAIIS USB Boot disk Release 1.18 |
Short: ANAIIS USB Boot disk Release 1.18 |
|
|
anaiis_hostusb.lha |
198.6KB |
18-12-2112/21 |
Short: ANAIIS libusb support for WinUAE Rel |
Short: ANAIIS libusb support for WinUAE Rel |
|
|
SonnetLibrary.lha |
52.9KB |
18-12-1112/11 |
Short: Mediator driver for G3/G4 PCI cards |
Short: Mediator driver for G3/G4 PCI cards |
|
|
MUISnapscan_src.lha |
1.3MB |
17-10-1110/11 |
1312k MUISnapscan source code (generic) |
1312k MUISnapscan source code (generic) |
|
|
furiatuneGUI_1.0.lha |
150.8KB |
17-04-1104/11 |
150k Graphical user interface for furiatune (m68k- |
150k Graphical user interface for furiatune (m68k- |
|
|
seta1final.lha |
9.5KB |
16-03-1503/15 |
9k Tweak the AmigaOne SE/XE hardware (ppc-amigaos |
9k Tweak the AmigaOne SE/XE hardware (ppc-amigaos |
|
|
040_060Libs.lha |
132.1KB |
15-03-2703/27 |
132k 68040/68060 libraries (Phase 5) (m68k-amigaos |
132k 68040/68060 libraries (Phase 5) (m68k-amigaos |
|
|
68060-19101999.lha |
185.9KB |
15-03-2703/27 |
185k 68060 Library (Phase 5) (m68k-amigaos) |
185k 68060 Library (Phase 5) (m68k-amigaos) |
|
|
68060systemdisk.lha |
272.1KB |
15-03-2703/27 |
272k 68060 Systemdisk (Phase 5) (m68k-amigaos) |
272k 68060 Systemdisk (Phase 5) (m68k-amigaos) |
|
|
blizzard2060systemdisk.lha |
272.1KB |
15-03-2703/27 |
272k Blizzard 2060 Systemdisk (Phase 5) (m68k-amig |
272k Blizzard 2060 Systemdisk (Phase 5) (m68k-amig |
|
|
fastlanez3.lha |
15.4KB |
15-03-2703/27 |
15k z3scsi.device (Phase 5) (m68k-amigaos) |
15k z3scsi.device (Phase 5) (m68k-amigaos) |
|
|
FlashUpdates-09042000.lha |
940.1KB |
15-03-2703/27 |
940k CyberStorm PPC/MK3 & Blizzard PPC Flash Updat |
940k CyberStorm PPC/MK3 & Blizzard PPC Flash Updat |
|
|
FlashUpdates-26042002.lha |
940.3KB |
15-03-2703/27 |
940k CyberStorm PPC/MK3 & Blizzard PPC Flash Updat |
940k CyberStorm PPC/MK3 & Blizzard PPC Flash Updat |
|
|
SystemDisk-431.lha |
351.9KB |
15-03-2703/27 |
351k Cyberstorm system disk (Phase 5) (m68k-amigao |
351k Cyberstorm system disk (Phase 5) (m68k-amigao |
|
|
SCANdalSP.lha |
4KB |
14-11-2611/26 |
3k SCANdal spanish catalog and readme v1.1 (generi |
3k SCANdal spanish catalog and readme v1.1 (generi |
|
|
PciTool_3.0.lha |
308.3KB |
13-12-2312/23 |
308k Program to show PCI-card infos (ppc-MorphOS) |
308k Program to show PCI-card infos (ppc-MorphOS) |
|
|
anaiis_lowlevel.lha |
16.3KB |
12-04-1804/18 |
16k Anaiis lowlevel release 0.01 (m68k-amigaos) |
16k Anaiis lowlevel release 0.01 (m68k-amigaos) |
|
|
pciserial.device.lha |
12.2KB |
11-09-1709/17 |
12k Mediator Serial port driver (m68k-amigaos >= 3 |
12k Mediator Serial port driver (m68k-amigaos >= 3 |
|
|
pciparallel.device.lha |
37.3KB |
11-05-1605/16 |
37k Mediator parallel port driver (m68k-amigaos >= |
37k Mediator parallel port driver (m68k-amigaos >= |
|
|
SCANdal_DE.lha |
7.4KB |
11-03-2703/27 |
7k German catalog for SCANdal, final (generic) |
7k German catalog for SCANdal, final (generic) |
|
|
scandal.lha |
176.8KB |
11-03-2603/26 |
176k MUI Betascan Frontend (ppc-morphos >= 2.7) |
176k MUI Betascan Frontend (ppc-morphos >= 2.7) |
|
|
Helios_0.4-svn_r560.lha |
165.6KB |
10-09-2609/26 |
165k IEEE1394 (Firewire) driver, tools + SDK (ppc- |
165k IEEE1394 (Firewire) driver, tools + SDK (ppc- |
|
|
epsonusb_morphos.lha |
50.5KB |
09-11-2211/22 |
50k Epson SANE/Betascan MorphOS native driver (ppc |
50k Epson SANE/Betascan MorphOS native driver (ppc |
|
|
umax_morphos.lha |
61.2KB |
09-10-0710/07 |
61k Umax SAME/Betascan MorphOS native driver (ppc- |
61k Umax SAME/Betascan MorphOS native driver (ppc- |
|
|
scandal_os3.lha |
87.4KB |
09-08-0608/06 |
87k MUI Betascan Frontend (m68k-amigaos >= 3.0) |
87k MUI Betascan Frontend (m68k-amigaos >= 3.0) |
|
|
ircomremote.lha |
227.8KB |
09-03-2403/24 |
227k Control your computer by using a remote (ppc- |
227k Control your computer by using a remote (ppc- |
|
|
FreeBoardTK.lzh |
36.3KB |
08-09-3009/30 |
36k Expansion Board Toolkit - various tools (m68k- |
36k Expansion Board Toolkit - various tools (m68k- |
|
|
ParIR.lha |
152KB |
08-08-2208/22 |
152k Parallel IR receiver + audio over TP (ppc-ami |
152k Parallel IR receiver + audio over TP (ppc-ami |
|
|
BoardTK.lha |
36.2KB |
08-06-1406/14 |
36k Expansion Board Toolkit - various tools (m68k- |
36k Expansion Board Toolkit - various tools (m68k- |
|
|
ircom.lha |
319.6KB |
07-03-1403/14 |
319k V2.11 Infra red driver system (ppc-morphos >= |
319k V2.11 Infra red driver system (ppc-morphos >= |
|
|
ArakAttack.lha |
172.3KB |
07-01-0401/04 |
172k USB Driver for Amithlon & OpenPCI (v1.23) (m6 |
172k USB Driver for Amithlon & OpenPCI (v1.23) (m6 |
|
|
Combo2.lha |
183.1KB |
06-12-1312/13 |
183k Software for Combo2/Combo3 Eprommer (m68k-ami |
183k Software for Combo2/Combo3 Eprommer (m68k-ami |
|
|
pciutils-src.zip |
208.9KB |
06-05-1805/18 |
208k PCI hardware manipulation utils (src) (generi |
208k PCI hardware manipulation utils (src) (generi |
|
|
pciutils.zip |
155.3KB |
06-05-1805/18 |
155k PCI hardware manipulation utilities (i386-aro |
155k PCI hardware manipulation utilities (i386-aro |
|
|
usbmidi.lha |
15.3KB |
06-01-2201/22 |
15k CAMD driver for USB Class MIDI devices (ppc-am |
15k CAMD driver for USB Class MIDI devices (ppc-am |
|
|
yaps.lha |
173.1KB |
06-01-0801/08 |
173k Yet Another PCI Scan program (ppc-amigaos) |
173k Yet Another PCI Scan program (ppc-amigaos) |
|
|
BetaScanMustek.lha |
206.9KB |
06-01-0301/03 |
206k latest Mustek Betascan SANE driver (m68k-amig |
206k latest Mustek Betascan SANE driver (m68k-amig |
|
|
BetaScanUMax.lha |
332.9KB |
06-01-0301/03 |
332k Umax Betascan driver (m68k-amigaos) |
332k Umax Betascan driver (m68k-amigaos) |
|
|
X10CM11A.lzh |
343.9KB |
05-12-0412/04 |
343k Control X10 devices via CM11A (m68k-amigaos > |
343k Control X10 devices via CM11A (m68k-amigaos > |
|
|
AmigaSerial-MorphOS.lha |
21.7KB |
05-09-1309/13 |
21k serial.device for Classic amigas (ppc-morphos) |
21k serial.device for Classic amigas (ppc-morphos) |
|
|
openpci.lha |
6.2KB |
05-08-2908/29 |
6k OpenPCI compatibility layer for OS4 (ppc-amigao |
6k OpenPCI compatibility layer for OS4 (ppc-amigao |
|
|
DD2AG_0.3.lha |
23KB |
04-02-0802/08 |
23k Conv. DriverDescriptors to AmigaGuide (m68k-am |
23k Conv. DriverDescriptors to AmigaGuide (m68k-am |
|
|
ddc_0.72.lha |
61.2KB |
04-01-1801/18 |
61k DriverDescriptorCreator (ddc) (m68k-amigaos) |
61k DriverDescriptorCreator (ddc) (m68k-amigaos) |
|
|
HardwareAssist.lha |
269.7KB |
04-01-1301/13 |
269k Plug'N'Play system for Amiga computers (m68k- |
269k Plug'N'Play system for Amiga computers (m68k- |
|
|
PoseidonMain.lha |
422.6KB |
04-01-0401/04 |
422k Poseidon USB Stack Update 2.2 (m68k-amigaos) |
422k Poseidon USB Stack Update 2.2 (m68k-amigaos) |
|
|
PoseidonMOS.lha |
578.9KB |
04-01-0301/03 |
578k Poseidon USB for Pegasos Update 2.2 (ppc-morp |
578k Poseidon USB for Pegasos Update 2.2 (ppc-morp |
|
|
ambot.lha |
62.3KB |
03-12-1412/14 |
62k Cybot/Real Robots programmer w/ C source (m68k |
62k Cybot/Real Robots programmer w/ C source (m68k |
|
|
BetaScanSP.lha |
14.2KB |
03-06-0206/02 |
14k BetaScan 3.02 spanish catalog v3.02.0 (m68k-am |
14k BetaScan 3.02 spanish catalog v3.02.0 (m68k-am |
|
|
pccardserial.lha |
45KB |
03-04-0104/01 |
45k PC Card (PCMCIA) serial/modem driver (m68k-ami |
45k PC Card (PCMCIA) serial/modem driver (m68k-ami |
|
|
BetaScan3_PL.lha |
17.5KB |
03-03-2303/23 |
17k Polish catalog for BetaScan_v3 (m68k-amigaos) |
17k Polish catalog for BetaScan_v3 (m68k-amigaos) |
|
|
BetaScanSrc.lha |
183.6KB |
03-03-0703/07 |
183k Complete Source for BetaScan.v3 (3.05) (m68k- |
183k Complete Source for BetaScan.v3 (3.05) (m68k- |
|
|
BetaScan_GER.lha |
6.8KB |
03-03-0703/07 |
6k German catalog for BetaScan_v3 (m68k-amigaos) |
6k German catalog for BetaScan_v3 (m68k-amigaos) |
|
|
BetaScan_v3.lha |
128.1KB |
03-03-0703/07 |
128k BetaScan v.3 with Raction based GUI (m68k-ami |
128k BetaScan v.3 with Raction based GUI (m68k-ami |
|
|
IOBlixUsr.lha |
305KB |
02-12-1512/15 |
304k IOBlixZ2 / IOBlix1200 software update (m68k-a |
304k IOBlixZ2 / IOBlix1200 software update (m68k-a |
|
|
VarIOUsr.lha |
163KB |
02-12-1512/15 |
163k VarIO software update, 12-Dec-2002 (m68k-amig |
163k VarIO software update, 12-Dec-2002 (m68k-amig |
|
|
BetaScan.lha |
170.3KB |
02-11-2411/24 |
170k Scan program for virtually any scanner (m68k- |
170k Scan program for virtually any scanner (m68k- |
|
|
BetaScanHP.lha |
32.3KB |
02-11-1711/17 |
32k Driver for HP ScanJet scanners (m68k-amigaos) |
32k Driver for HP ScanJet scanners (m68k-amigaos) |
|
|
pcmser.lha |
14.8KB |
02-10-1310/13 |
14k PCMCIA modem driver. PD w/ src. (m68k-amigaos) |
14k PCMCIA modem driver. PD w/ src. (m68k-amigaos) |
|
|
SpeedyPar433.lha |
18.1KB |
02-09-0809/08 |
18k Optimized parallel & printer device (m68k-amig |
18k Optimized parallel & printer device (m68k-amig |
|
|
ICS.lha |
2.5MB |
02-07-3107/31 |
2555k Profess. color correction for scanners (m68k |
2555k Profess. color correction for scanners (m68k |
|
|
BetaScanDev.lha |
186.2KB |
02-04-2104/21 |
186k BetaScan Device Development (m68k-amigaos) |
186k BetaScan Device Development (m68k-amigaos) |
|
|
ScanTek4_6.lha |
203.6KB |
02-02-0802/08 |
203k Microtek/Highscreen/Mustek scanner driver (m6 |
203k Microtek/Highscreen/Mustek scanner driver (m6 |
|
|
aws.lha |
62.9KB |
01-11-2111/21 |
62k Use your serial digital camera as webcam (m68k |
62k Use your serial digital camera as webcam (m68k |
|
|
TestGear4A.lha |
102.9KB |
01-10-2410/24 |
102k The Oscilloscope Disk 4A. (m68k-amigaos) |
102k The Oscilloscope Disk 4A. (m68k-amigaos) |
|
|
ScanQuix5_FR.lha |
19.7KB |
01-09-0509/05 |
19k French catalogs for ScanQuix5 (generic) |
19k French catalogs for ScanQuix5 (generic) |
|
|
Medication_it.lha |
18.4KB |
01-08-2108/21 |
18k Italian guide for Medication (generic) |
18k Italian guide for Medication (generic) |
|
|
BetaScan_Umax.lha |
85.7KB |
01-08-1708/17 |
85k Umax Scanner Driver For BetaScan (m68k-amigaos |
85k Umax Scanner Driver For BetaScan (m68k-amigaos |
|
|
ScanQuixSP.lha |
19.1KB |
01-08-1708/17 |
19k ScanQuix 5.x spanish catalogs v1.1.1 (generic) |
19k ScanQuix 5.x spanish catalogs v1.1.1 (generic) |
|
|
Medication.lha |
108KB |
01-07-0207/02 |
107k Powerfull GUI for Mediator owners (m68k-amiga |
107k Powerfull GUI for Mediator owners (m68k-amiga |
|
|
Med_Up.lha |
48.3KB |
01-07-0207/02 |
48k Update Medication 1.0 to 1.01 (m68k-amigaos) |
48k Update Medication 1.0 to 1.01 (m68k-amigaos) |
|
|
TimeServY2K.lha |
7.1KB |
01-06-0406/04 |
7k Year 2000 patch of TimeServ for Sidecar (m68k-a |
7k Year 2000 patch of TimeServ for Sidecar (m68k-a |
|
|
GVPIOPrefsFix.lha |
11.2KB |
01-01-3001/30 |
11k Fix GVPSerial prefs for all screen depths (m68 |
11k Fix GVPSerial prefs for all screen depths (m68 |
|
|
CC-Tools.lha |
35.8KB |
01-01-0601/06 |
35k Download to C-Control/BASIC (m68k-amigaos) |
35k Download to C-Control/BASIC (m68k-amigaos) |
|
|
PrimaxCD9600.lha |
56.5KB |
00-12-0512/05 |
56k Scanner Driver for PARalizer Card (m68k-amigao |
56k Scanner Driver for PARalizer Card (m68k-amigao |
|
|
BetaSnap_0.17.lha |
29.9KB |
00-11-0511/05 |
29k Driver for Agfa SnapScan scanners (m68k-amigao |
29k Driver for Agfa SnapScan scanners (m68k-amigao |
|
|
turd_020.lha |
424.1KB |
00-11-0411/04 |
424k The Ultimate Relay Driver (m68k-amigaos) |
424k The Ultimate Relay Driver (m68k-amigaos) |
|
|
turd_040.lha |
424.7KB |
00-11-0411/04 |
424k The Ultimate Relay Driver (m68k-amigaos) |
424k The Ultimate Relay Driver (m68k-amigaos) |
|
|
turd_060.lha |
424.4KB |
00-11-0411/04 |
424k The Ultimate Relay Driver (m68k-amigaos) |
424k The Ultimate Relay Driver (m68k-amigaos) |
|
|
ctb14.lha |
39.2KB |
00-08-2008/20 |
39k CATV: set switches, frequencies and CTB (m68k- |
39k CATV: set switches, frequencies and CTB (m68k- |
|
|
BetaScanApple.lha |
24.9KB |
00-05-1405/14 |
24k Driver for Apple scanners (m68k-amigaos) |
24k Driver for Apple scanners (m68k-amigaos) |
|
|
BetaSnapScan.lha |
42KB |
00-05-1405/14 |
41k Driver for Agfa SnapScan scanners (m68k-amigao |
41k Driver for Agfa SnapScan scanners (m68k-amigao |
|
|
mmp.lha |
20.3KB |
00-04-1404/14 |
20k TPP/QP driver for CAMD (with source) (m68k-ami |
20k TPP/QP driver for CAMD (with source) (m68k-ami |
|
|
ICSmanlj.lha |
1.5MB |
00-04-0104/01 |
1533k ICS manual as 300dpi Laserjet file (generic) |
1533k ICS manual as 300dpi Laserjet file (generic) |
|
|
ICSmanps.lha |
514.7KB |
00-04-0104/01 |
514k ICS manual as PostScript file (generic) |
514k ICS manual as PostScript file (generic) |
|
|
Spitfire.lha |
428.2KB |
00-02-0302/03 |
428k A Palm Desktop for the Amiga! (m68k-amigaos) |
428k A Palm Desktop for the Amiga! (m68k-amigaos) |
|
|
CSPPC233Fix.lha |
12.9KB |
99-11-2311/23 |
12k Workaround for CSPPC/233 hardware bug (m68k-am |
12k Workaround for CSPPC/233 hardware bug (m68k-am |
|
|
ICSProfiles.lha |
185.3KB |
99-08-3008/30 |
185k Scanner Profiles for ICS V1.0x (generic) |
185k Scanner Profiles for ICS V1.0x (generic) |
|
|
IOBlixParUpd.lha |
14KB |
99-05-1705/17 |
14k IOBlixZ2/IOBlix1200 par. driver bugfix (m68k-a |
14k IOBlixZ2/IOBlix1200 par. driver bugfix (m68k-a |
|
|
ICS101.lha |
1.3MB |
99-04-2004/20 |
1296k Profess. color correction for scanners (m68k |
1296k Profess. color correction for scanners (m68k |
|
|
BetaScanCanon.lha |
19.2KB |
99-04-0204/02 |
19k Driver for Canon scanners (1999.03.04) (m68k-a |
19k Driver for Canon scanners (1999.03.04) (m68k-a |
|
|
BetaScanEpson.lha |
21.4KB |
99-04-0204/02 |
21k Driver for Epson scanners (1999.03.04) (m68k-a |
21k Driver for Epson scanners (1999.03.04) (m68k-a |
|
|
BetaScanMicro.lha |
33.7KB |
99-04-0204/02 |
33k Driver for Microtek scanners (1999.01.22) (m68 |
33k Driver for Microtek scanners (1999.01.22) (m68 |
|
|
IOBlixSerUpd.lha |
14.5KB |
99-04-0104/01 |
14k IOBlixZ2/IOBlix1200 serial driver bugfix (m68k |
14k IOBlixZ2/IOBlix1200 serial driver bugfix (m68k |
|
|
ScanTrax.lha |
803.4KB |
99-04-0104/01 |
803k HP/Epson Scanner-Driver (m68k-amigaos; ppc-wa |
803k HP/Epson Scanner-Driver (m68k-amigaos; ppc-wa |
|
|
Flash-300399.lha |
939.7KB |
99-04-0104/01 |
939k CyberStorm PPC/MK3 & Blizzard PPC Flash Updat |
939k CyberStorm PPC/MK3 & Blizzard PPC Flash Updat |
|
|
Flash-230399.lha |
939.3KB |
99-03-2503/25 |
939k CyberStorm PPC/MK3 & Blizzard PPC Flash Updat |
939k CyberStorm PPC/MK3 & Blizzard PPC Flash Updat |
|
|
Camedia.lha |
40.8KB |
99-03-0503/05 |
40k Transfer pics from digital camera->Amiga (m68k |
40k Transfer pics from digital camera->Amiga (m68k |
|
|
HiQ.lha |
66.5KB |
99-03-0503/05 |
66k Play samples with more then 30 kHz frequency ( |
66k Play samples with more then 30 kHz frequency ( |
|
|
MUISnapScan.lha |
127KB |
99-02-0802/08 |
126k Scanner driver for AGFA SNAPSCAN's 68020+ (m6 |
126k Scanner driver for AGFA SNAPSCAN's 68020+ (m6 |
|
|
AiwaNSXS212Ctl.lha |
12.2KB |
99-01-1201/12 |
12k Panel to control Aiwa NSX-S212 (generic) |
12k Panel to control Aiwa NSX-S212 (generic) |
|
|
PanasoHD101.lha |
14.7KB |
99-01-1201/12 |
14k Panel to control Panasonic NV-HD101 VCR (m68k- |
14k Panel to control Panasonic NV-HD101 VCR (m68k- |
|
|
PanasonicCTL.lha |
157.5KB |
99-01-0301/03 |
157k Controls your Panasonic VCR (m68k-amigaos) |
157k Controls your Panasonic VCR (m68k-amigaos) |
|
|
SetupIOBlix.lha |
27KB |
98-12-2712/27 |
26k SetupIOBlix update, 23-Dec-98 (m68k-amigaos) |
26k SetupIOBlix update, 23-Dec-98 (m68k-amigaos) |
|
|
turd_ii.lha |
228.6KB |
98-12-0512/05 |
228k The Ultimate Relay Driver (m68k-amigaos) |
228k The Ultimate Relay Driver (m68k-amigaos) |
|
|
ScanTrax_SP.lha |
11KB |
98-11-3011/30 |
11k ScanTrax 2.0 spanish catalogs (generic) |
11k ScanTrax 2.0 spanish catalogs (generic) |
|
|
rdirect34.lha |
33KB |
98-10-2810/28 |
33k The one and only relais-controller (m68k-amiga |
33k The one and only relais-controller (m68k-amiga |
|
|
amipalmcam.lha |
8.1KB |
98-10-1910/19 |
8k Download pics from Panaonic PalmCam (m68k-amiga |
8k Download pics from Panaonic PalmCam (m68k-amiga |
|
|
MemUtil.lha |
29.9KB |
98-09-2209/22 |
29k Memory testing,clearing,speed measuring (m68k- |
29k Memory testing,clearing,speed measuring (m68k- |
|
|
atc.lha |
131.4KB |
98-08-1808/18 |
131k AMIGA interface to the phonecards (m68k-amiga |
131k AMIGA interface to the phonecards (m68k-amiga |
|
|
68060-V44_3.lha |
179.9KB |
98-07-0907/09 |
179k 68040/060 Libs/Utils v44_3 from Phase5 (m68k- |
179k 68040/060 Libs/Utils v44_3 from Phase5 (m68k- |
|
|
dsa.lha |
141.1KB |
98-06-0406/04 |
141k 16ch. Digital Signal Analyser, A1200 IDE (m68 |
141k 16ch. Digital Signal Analyser, A1200 IDE (m68 |
|
|
VideoText.lha |
185.6KB |
98-06-0106/01 |
185k Teletext browser, German (m68k-amigaos) |
185k Teletext browser, German (m68k-amigaos) |
|
|
ArtecScan.lha |
84.3KB |
98-03-2003/20 |
84k Artec A6000C+/AT3 scanner driver V1.2 (m68k-am |
84k Artec A6000C+/AT3 scanner driver V1.2 (m68k-am |
|
|
SemaphoreEdit.lha |
76.1KB |
98-03-1203/12 |
76k Edit controller for Sanyo GVR-S950 VCR's (m68k |
76k Edit controller for Sanyo GVR-S950 VCR's (m68k |
|
|
PPCTool2_2.lha |
17.1KB |
98-02-2702/27 |
17k display information about your PPC card (ppc-p |
17k display information about your PPC card (ppc-p |
|
|
EOLM.lha |
117.6KB |
97-12-0112/01 |
117k Disco effect (m68k-amigaos) |
117k Disco effect (m68k-amigaos) |
|
|
remote.lha |
5.6KB |
97-11-1011/10 |
5k TV Remote GUI for CU-Amiga AirLink (m68k-amigao |
5k TV Remote GUI for CU-Amiga AirLink (m68k-amigao |
|
|
StScan.lha |
96.4KB |
97-08-2108/21 |
96k StScan - ST-400 scanner software (m68k-amigaos |
96k StScan - ST-400 scanner software (m68k-amigaos |
|
|
VideoText_ENG_pch.lha |
33.7KB |
97-07-0307/03 |
33k English localization for VideoText v5.41 (m68k |
33k English localization for VideoText v5.41 (m68k |
|
|
rdirect28.lha |
26.1KB |
97-04-1604/16 |
26k The one and only relais-controller (m68k-amiga |
26k The one and only relais-controller (m68k-amiga |
|
|
Messie.lha |
42.8KB |
97-01-2701/27 |
42k Multichannel A/D converter software (m68k-amig |
42k Multichannel A/D converter software (m68k-amig |
|
|
QCamPnP.lha |
16.7KB |
97-01-0401/04 |
16k Device driver for Connectix Quickam (m68k-amig |
16k Device driver for Connectix Quickam (m68k-amig |
|
|
OsziV1_0.lha |
30.6KB |
96-11-0811/08 |
30k Oszilloskop for Conrad uMeter 4, German (m68k- |
30k Oszilloskop for Conrad uMeter 4, German (m68k- |
|
|
ParPortTst.lha |
38.5KB |
96-10-1510/15 |
38k Parallelport testing Hard- and Software (m68k- |
38k Parallelport testing Hard- and Software (m68k- |
|
|
ES3000_Demo.lha |
437.9KB |
96-09-0109/01 |
437k Chinon ES3000 camera decoder/receiver (m68k-a |
437k Chinon ES3000 camera decoder/receiver (m68k-a |
|
|
MultiScan21.lha |
55.6KB |
96-07-2107/21 |
55k scanner soft for Epson ES/GT scsi scanner (m68 |
55k scanner soft for Epson ES/GT scsi scanner (m68 |
|
|
LCD.lha |
19.3KB |
96-05-2905/29 |
19k Connect a LCD to your PAR: (ARexx) (m68k-amiga |
19k Connect a LCD to your PAR: (ARexx) (m68k-amiga |
|
|
i2cHost.lha |
63.2KB |
96-05-2105/21 |
63k Connect i2c-bus to AMIGA (German) (m68k-amigao |
63k Connect i2c-bus to AMIGA (German) (m68k-amigao |
|
|
GALer21.lha |
512.2KB |
96-05-0205/02 |
512k This is a GAL device programmer. (m68k-amigao |
512k This is a GAL device programmer. (m68k-amigao |
|
|
VTXTJoy25.lha |
57.8KB |
96-03-3103/31 |
57k Videotext V2.5 joystick update (m68k-amigaos) |
57k Videotext V2.5 joystick update (m68k-amigaos) |
|
|
vtxt_25.lha |
266.3KB |
96-02-1302/13 |
266k Video/teletext software V2.5 (HSL) (m68k-amig |
266k Video/teletext software V2.5 (HSL) (m68k-amig |
|
|
BlizzRepair2.lha |
1.9KB |
95-10-0110/01 |
1k Repairs Blizzard1220 fast memory problem (m68k- |
1k Repairs Blizzard1220 fast memory problem (m68k- |
|
|
Epson.lha |
37.7KB |
95-07-0607/06 |
37k Epson GT-xxxx scanner software for Retina (m68 |
37k Epson GT-xxxx scanner software for Retina (m68 |
|
|
ARexX-10.lha |
26.3KB |
95-06-2006/20 |
26k Communicates with X-10 coprocessors (m68k-amig |
26k Communicates with X-10 coprocessors (m68k-amig |
|
|
vc-2_2.lha |
218.7KB |
94-11-0411/04 |
218k Software Driver for Vector Connection (m68k-a |
218k Software Driver for Vector Connection (m68k-a |
|
|
gagedrv_demo.lha |
95.2KB |
94-09-2309/23 |
95k Demo version of driver for Gage CS220 (m68k-am |
95k Demo version of driver for Gage CS220 (m68k-am |
|
|
GVPIOPatch10.lha |
7.3KB |
93-12-2112/21 |
7k Patch GVP-IOExtender software via GUI (m68k-ami |
7k Patch GVP-IOExtender software via GUI (m68k-ami |
|
|
EPROMmer.lha |
129.7KB |
93-11-2011/20 |
129k Hardware/Software for an Eprommer (m68k-amiga |
129k Hardware/Software for an Eprommer (m68k-amiga |
|
|
AutoXA.lha |
8.6KB |
93-10-0710/07 |
8k Program for Microbotics M1230XA board. (m68k-am |
8k Program for Microbotics M1230XA board. (m68k-am |
|
|
TWPatch1.lzh |
50.7KB |
93-09-2709/27 |
50k TapeWorm-FS Patch from V1.0 to V1.2 (m68k-amig |
50k TapeWorm-FS Patch from V1.0 to V1.2 (m68k-amig |
|
|
FastPAR1_0.lha |
5.1KB |
93-09-1709/17 |
5k Replacement for PAR: device (m68k-amigaos) |
5k Replacement for PAR: device (m68k-amigaos) |
|
|
SpeedRamsey12a.lha |
7.3KB |
93-08-1708/17 |
7k Sets skip mode in Rev G Ramsey (m68k-amigaos) |
7k Sets skip mode in Rev G Ramsey (m68k-amigaos) |
|
|
X10Commander.lha |
28KB |
93-08-0408/04 |
27k Control the X10 home control interface (m68k-a |
27k Control the X10 home control interface (m68k-a |
|
|
supra25.lha |
59.9KB |
93-04-2504/25 |
59k Modem0.device v2.5 for Supra ZI modems (m68k-a |
59k Modem0.device v2.5 for Supra ZI modems (m68k-a |
|
|
SerPat20.lha |
10.2KB |
93-02-0102/01 |
10k "replaces" serial.devive (m68k-amigaos) |
10k "replaces" serial.devive (m68k-amigaos) |
|
|
CyberX10.lha |
33.3KB |
92-11-0611/06 |
33k House remote control (m68k-amigaos) |
33k House remote control (m68k-amigaos) |
|
|
zkick-adram.lha |
7.8KB |
92-01-0901/09 |
7k Load higher OS versions on adram board (m68k-am |
7k Load higher OS versions on adram board (m68k-am |
|
|
SetRamsey.lha |
4.8KB |
91-11-2111/21 |
4k Tests current settings of RAMSEY chip (m68k-ami |
4k Tests current settings of RAMSEY chip (m68k-ami |
|
|
SetClock.lha |
14KB |
90-10-2310/23 |
13k Set or read Spirit Tech hardware clock. (m68k- |
13k Set or read Spirit Tech hardware clock. (m68k- |
|
|
setparallel.lha |
10.8KB |
87-01-1501/15 |
10k Change parallel port parameters from CLI (m68k |
10k Change parallel port parameters from CLI (m68k |
|